WE series digital display hydraulic universal testing machine is mainly used for tensile, compression, bending and other mechanical performance tests of metal materials. After adding simple accessories, it can test cement, concrete, brick, tile, rubber and its products. Product description: WE series digital display hydraulic universal testing machine is mainly used for tensile, compression, bending and other mechanical performance tests of metal materials. After adding simple accessories, it can test cement, concrete, bricks, tiles, rubber and their products. This machine is composed of a double-column double-screw cylinder under-mounted main engine and a piano-type oil source control cabinet. The tensile space is located above the host, and the compression and bending tests are located below the host, that is, between the middle beam and the workbench. The adjustment of the test space is realized by moving the middle beam, and the lifting and lowering of the middle beam is driven by a chain. Manually adjust the oil intake of the oil delivery valve to realize the tensile, compression, and bending tests of the material. After the test is completed, the test results such as the maximum force and tensile strength of the material are automatically obtained. Performance characteristics: 1. The special ultra-thick jaw seat enables the jaws to be completely contained in the jaw seat body when the jaws are holding the sample, making the sample clamping more reliable, and preventing the possibility of horn-shaped deformation and damage due to the shallow jaw seat. Improve the service life of the equipment. 2. A wear-resistant liner is added between the jaw seat and the jaw clamping plate to prevent the oxide scale from falling into the metal during the stretching process, which may cause scratches on the inclined surface of the jaw seat, making the clamping process smoother and more profitable. reliable. 3. The measurement and control system has a fast running speed, a gentle interface, and a variety of sample information input modes, which can meet the test of different materials. For samples with the same conditions, enter multiple input at a time and automatically generate them. 4. The test force shows that the resolution remains unchanged throughout the whole process to ensure the accuracy of the experimental data measurement. 5. The test data (test force, loading rate) and test curve are displayed on the screen dynamically and in real time along with the test process. 6. After the experiment is over, the experimental data will be automatically analyzed, stored and printed automatically. 7. When the load exceeds 2%-100% of the slow range, the automatic overload protection stops. 8. Relevant historical records can be automatically queried for the decomposition test date. 9. The software reserves a data interface, which is convenient for local networking between the laboratory and convenient for test data management. Technical parameter:

Product number	WE-100B	WE-300B	WE-600B	WE-1000B
Host structure	Double-column double-screw oil cylinder under-mounted structure
Maximum test force	100 kN	300 kN	600 kN	1000 kN
Test machine level	Level 1
Test force measurement range	2%-100%
Test force indication Relative error	≦±1% of indicated value
Maximum piston movement speed	70 (mm/min)
Cross beam adjustment speed	120 (mm/min)
Piston stroke	250mm
Control Way	Manual loading
Effective stretching space	650mm
Effective compression space	550mm
Column spacing	540mm	540mm	540mm	650mm
Clamping method	Manual clamping (hydraulic clamping is optional)
Clamping diameter of round specimen	φ6-φ26mm	φ6-φ26mm	φ13-φ40mm	φ13-φ40mm
Clamping thickness of flat specimen	0-15mm	0-15mm	0-15mm	0-30mm
Flat specimen clamping width	70mm	70mm	75mm	75mm
Upper and lower pressure plate size	φ160/204*204mm (optional)
Bending roller spacing	600 mm
Width of bending support roll	140mm
Safety protection device	Mechanical limit protection and software overload protection
Overall dimensions of the host (mm)	810×560×2050	810×560×2050	830×580×2150	10600×660×2450
Host power	0.55KW	0.55KW	0.55KW	0.75KW
Overall dimensions of oil source control cabinet (mm)	580×5500×1280
Control cabinet power supply	1.5 KW
Main machine weight	1500kg	1800kg	2100kg	2800kg